Technical Tip: How to check the BGP router-id using the CLI

[Rajneesh]

Description	This article describes how to check the BGP router-id using the CLI.
Scope	FortiGate.
Solution	This command can be used to check the router-id of the BGP: get router info bgp summary Router-ID is a 32-bit number of the BGP process and uses dotted decimal notation. Router-ID must be an IP address of the router and must be unique within the entire BGP domain. It is recommended to use loopback interface IP as router-ID. By default, the auto-selected router-id is not shown in the GUI, if it has not been configured manually. It will be visible only when it has been configured manually using the GUI or the CLI. Related articles: Troubleshooting Tip: BGP router-id not updating Technical Tip: BGP router-id selection criteria on FortiGate