|
For example: it can happen when advertising statically on BGP 192.168.1.1/32:
get router info bgp neighbors x.x.x.x advertised-routes
Therefore, it will not show the advertised routes. When calling 192.168.1.0/24, it shows a complete network in the BGP advertised routes.
Solution:
While advertising a single IP in the whole network, it is necessary to create a separate static route for the IP while advertising in the BGP.
For reference on creating a static route via GUI but in this case, 192.168.1.1/32 will be set as the destination address.
Technical Tip: How to create a static route on FortiGate from the GUI Interface
After creating a static route for the single IP, it will be possible to see the IP information in 'advertised BGP routes'.
|
