Technical Tip: How to add a VLAN interface under SD-WAN members

[mpeddalla]

Description	This article describes how to add a VLAN interface under SD-WAN members.
Scope	FortiGate.
Solution	Make sure all references under the VLAN are removed or else delete them by checking reference dependencies   Note: It is not possible to integrate the VLAN interface without removing the interface. It is only possible to integrate the whole physical interface under the SD-WAN zone.   Now select the SD-WAN option, create a new member then choose to create select the drop-down option under interface, and choose the VLAN to add.   Once a member is created, it is possible to choose the SD-WAN zone in which wanted to add the current interface.  Then select 'OK'.   Then, it is possible to add cost and priority for the member. Consider these as administrative distance and priority of interface members that can route traffic. After giving the desired details, select 'OK' to save. In the below picture, the VLAN member is now part of the virtual WAN interface.