Technical Tip: How to add FortiGate-7000 in FortiManager

[acvaldez]

Description	This article describes how to add a FortiGate-7000 series in FortiManager.
Scope	FortiManager
Solution	Environment Details: • Chassis v7.0.14 (Build 0226). • FortiManager v7.4.6 (Build 2588). Step 1: Configure Central Management on the Chassis: On the Chassis side, configure the system central-management settings to allow it to connect with FortiManager. Step 2: Enable ADOM Mode on FortiManager: Log in to FortiManager and enable ADOM (Administrative Domain) Mode. Note: After enabling, FortiManager will log out. Log back in to proceed. Step 3: Create a New ADOM:  Step 4: Add the Chassis as a Managed Device: Go to the newly created 7K-Carrier ADOM. Add a new device. Enter the IP address of the Chassis (must be reachable by FortiManager). Step 5: Device Discovery: FortiManager will initiate the discovery process. Wait for it to complete. Step 6: Import Chassis Configuration: Once discovery is successful, proceed to import the Chassis configuration: Can import configuration per VDOM or all VDOMs at once. For this guide, it will import all VDOMs in one go. Step 7: Confirmation: Once the import is complete, the Chassis should now appear as successfully managed by FortiManager: The Chassis is now successfully registered and managed by FortiManager: