Description
This article explains how to download FSSO agent software.
Scope
Download FSSO.
Solution
In order to install FSSO agent-based authentication, the software has to be downloaded from the Fortinet Service and Support web portal.
Each firmware version is released together with a corresponding agent version.
Refer to the below process for FortiOS 6.4.
Once logged in to support.fortinet.com,
- Select Support -> Firmware Download ->Select Product, and select FortiGate -> Download.
- Select the major version folder of the FortiGate (In the example it is v6.00 as the version referred to as 6.4.0).
- Select the minor version folder (In the example it is 6.4).
- Select the point release folder (In example 6.4.0).
- Enter into the FSSO folder and download the next files, Select "HTTPS" on each file to download it
DCAgent_Setup_5.0.0289_x64.exe <----- Contains DCagent software.
FSSO_Setup_5.0.0289_x64.exe <----- Contains DCagent and Collector software.
TSAgent_Setup_5.0.0289.exe <----- Contains TS Agent for Citrix server
- Install a version of the FSSO that is the same version as or a higher version than the firmware.
Example:
Note: In summary, the `DCAgent_Setup` is for installing the DC Agent on domain controllers, while the 'FSSO_Setup' is for installing the FSSO Collector Agent, which can work with or without the DC Agent.
Related articles:
- Technical Tip: How to validate MD5 checksum hash for FSSO installer
- Technical Tip: FSSO Collector Agent unable to install DC agent to Domain Controller
- Technical Tip: Comparison between DC-Agent mode and polling mode
- Technical Tip: FSSO choose between DC Agent mode or Polling mode
- Technical Tip: How to install FSSO Collector Agent
- Technical Tip: FSSO Agent in polling mode
- Technical Tip: Configure FSSO in DC Agent mode
- Technical Tip: FSSO Windows Directory Access Methods - Standard versus Advanced Mode
- Technical Tip: Windows event IDs used by FSSO in WinSec polling mode
- Troubleshooting Tip: FSSO Complete troubleshooting for TAC tickets
