Technical Tip: Disable FortiCare Registration warning/notification

[nathan_h]

Description	This article describes how to disable the notification 'Register with Forticare'.
Scope	FortiGate
Solution	Log in to FortiGate. The FortiGate Setup window will pop up: Select 'Later'. Select the web console or CLI console: Run the commands below: config system global     set gui-forticare-registration-setup-warning <enable/disable> <----- enable: Display the feature from the GUI, disable: Do not display the feature from the GUI. end Note: Beginning with v7.4.9, newly deployed FortiGate units are required to complete FortiCare registration before full access to the FortiOS GUI, and the complete CLI feature set is enabled for additional device configuration. For further details, check Enforce FortiCare registration with read-only CLI 7.4.9  To disable FortiCare registration enforcement check, this can be achieved via the BIOS. For more details, check: Technical Tip: Enforcing FortiCare Registration Starting From v7.2.11, v7.4.8, v7.6.5, v8.0.0