| Description |
This article describes that if there are 2 ISP providers and to change the WAN IP that is displayed on the dashboard, it is possible to perform the following changes. |
| Scope |
FortiGate v6 and later. |
| Solution |
It is possible to set the source IP that will establish the connection to the FortiGuard Servers and that will be displayed on the dashboard.
It is also possible to select the interface method as well.
Note: The default FortiGuard setting for the interface is 'auto', if SD-WAN is configured, setting the interface selection method to SD-WAN fields the correct results on the dashboard.
Note: Both WAN interfaces should be able to reach the Internet outside and need to see both interfaces in the routing table. |
