Technical Tip: Activating FortiToken Mobile without Email nor SMS

[jiahoong112]

Description	This article describes how to activate FortiToken Mobile without Email or SMS.
Scope	FortiGate v6.4, v7.0, v7.2, v7.4, v7.6.0-v7.6.3
Solution	On the CLI, run the following commands: diagnose debug reset diagnose debug application alertmail -1 diagnose debug enable In this example, a local user is used. Create a user and assign it a token as such. The built-in Trial Fortitokens that comes with every FortiGate is used in this case. After selecting Ok, an email will be sent, or in this case, an attempt to be made to send it. In the alert mail debug, the activation code required can be seen in the area circled in Red. Using this, activate the FortiToken in the FortiToken Mobile application. Open the FortiToken Mobile application on the Mobile Device and follow the steps below: Note: The activation code will no longer be available in the alertmail debug and obfuscated in the system event from v7.6.3 onwards:   Related articles: Troubleshooting Tip: Get FortiToken Mobile activation code when activation email is not received Technical Tip: How to activate FortiToken manually for admin account