C1-S1 # config switch fabric-channel physical-portFortiGate configuration :
(physical-port)# edit slot-3
(slot-3)# set speed 40000full
(slot-3)# end
C1-S3 (global) # conf sys intOther hardware combinations do not support 40G backplane, therefore the backplane fabric interfaces must be set to 10G :
C1-S3 (interface) # edit elbc-ctrl/1
C1-S3 (elbc-ctrl/1) # set speed 40000full
C1-S3 (elbc-ctrl/1) # next
C1-S3 (interface) # edit elbc-ctrl/2
C1-S3 (elbc-ctrl/2) # set speed 40000full
C1-S3 (elbc-ctrl/2) # end
C1-S1 # config switch fabric-channel physical-port
(physical-port)# edit slot-3
(slot-3)# set speed 10000full
(slot-3)# end
C1-S1 # config system global
(global)# set fabric-backplane-port-10g-mode enable
WARNING: Enabling fabric channel backplane port 10G mode will clear the existing interface configuration and reboot system.
Do you want to continue? (y/n)y
(global)# end
C1-S1 # config switch fabric-channel physical-portFortiGate configuration :
(physical-port)# edit slot-3
(slot-3)# set speed 10000full
(slot-3)# end
C1-S3 (global) # conf sys int
C1-S3 (interface) # edit elbc-ctrl/1
C1-S3 (elbc-ctrl/1) # set speed 10000full
C1-S3 (elbc-ctrl/1) # next
C1-S3 (interface) # edit elbc-ctrl/2
C1-S3 (elbc-ctrl/2) # set speed 10000full
C1-S3 (elbc-ctrl/2) # end
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.