Description
Scope
Solution
This article describes the steps to enable OSPF logs and change level for showing information in router logs in the GUI.
Scope
OSPF logs.
Solution
By default, logs for OSPF are disabled and only critical events can be showed.
Via CLI
Via GUI
To enable all logs for OSPF:
After all logs have been enabled, the status will be changed and can be shown with the command:
To change the level of debugging, this is from critical to info level for show all events (or whatever is required).
For show level options
For change level option
The following command can be used to validate the current level after the change:
This can be tested by making some change in the OSPF configuration. The logs now shown in the GUI will be based on level that was set earlier.
Via CLI
#diag ip router ospf show
OSPF debugging status:
OSPF debugging level is CRITICAL
Via GUI
To enable all logs for OSPF:
# diag ip router ospf all enable
After all logs have been enabled, the status will be changed and can be shown with the command:
# diag ip router ospf show
OSPF debugging status:
OSPF all IFSM debugging is on
OSPF all NFSM debugging is on
OSPF packet Hello detail debugging is on
OSPF packet Database Description detail debugging is on
OSPF packet Link State Request detail debugging is on
OSPF packet Link State Update detail debugging is on
OSPF packet Link State Acknowledgment detail debugging is on
OSPF all LSA debugging is on
OSPF all NSM debugging is on
OSPF all events debugging is on
OSPF all route calculation debugging is on
OSPF debugging level is CRITICAL
To change the level of debugging, this is from critical to info level for show all events (or whatever is required).
For show level options
# diagnose ip router ospf level
critical Critical level.
error Error level.
info Information level.
none None level.
warn Warning level.
For change level option
# diagnose ip router ospf level show
The following command can be used to validate the current level after the change:
# diag ip router ospf show
OSPF debugging status:
OSPF all IFSM debugging is on
OSPF all NFSM debugging is on
OSPF packet Hello detail debugging is on
OSPF packet Database Description detail debugging is on
OSPF packet Link State Request detail debugging is on
OSPF packet Link State Update detail debugging is on
OSPF packet Link State Acknowledgment detail debugging is on
OSPF all LSA debugging is on
OSPF all NSM debugging is on
OSPF all events debugging is on
OSPF all route calculation debugging is on
OSPF debugging level is INFO
This can be tested by making some change in the OSPF configuration. The logs now shown in the GUI will be based on level that was set earlier.
Related Articles
