Description
This article provides a list of most popular articles related to FortiOS Routing.
Scope
All products.
Solution
Technical Note : Configuring link redundancy - traffic load-balancing - ECMP (Equal Cost Multiple Pa...
Technical Note: Detecting a link failure using Dead Gateway Detection (ping server) to ensure a link...
Configuring Dual Internet Links (Design Considerations)
Case Study : ECMP and Asymmetric Routing (different return path)
Creating redundant network interfaces
ECMP - Maximum number of paths and routing issues
Configuring a Default Route (Default Gateway) on a FortiGate in NAT mode
Technical Note : Conditions to get a route in the FortiGate routing table (valid next-hop for DHCP, ...
Technical Note : Setting priority on static default routes to create a primary (preferred) and a sec...
Technical Note : Policy Based Routing example to redirect HTTP traffic to a Proxy
Technical Note : Configuration example of Policy Based Routing and VIP for SMTP services in Dual Wan...
Technical Note : Policy Based Routing example : HTTP/HTTPS redirection. Configuration and troublesho...
Technical Note : OSPF configuration guide for ABR and ASBR settings
Technical Note : OSPF route redundancy over 2 VPN IPSec tunnels
Technical Note : How to redistribute a default route in OSPF on a FortiGate
Technical Note : simple OSPF configuration with 2 FortiGates in the same area
Technical Note : OSPF route summarization for LSAs Type3 (on ABR) and Type5 (on ASBR)
Technical Note : OSPFv3 (OSPF for IPv6) configuration example
Technical Note : FortiGate OSPF distribute-list-in example to prevent routes from being in the routi...
Technical Note : Configuring OSPF on a GRE tunnel between two FortiGates
Technical Note : How to enable RIP on FortiGate interfaces
Technical Note : Advertising only a Default Route in RIP with prefix-list and distribute-list
What is the RIP setting Enable Default-information-originate?
RIPnG (RIP IPv6) configuration example
RIP ver. 2.0 authentication
How to advertise an Aggregate Route in RIP on a FortiGate
Technical Note : FortiGate prefix-list example to advertise in RIP only a default route and drop all...
Technical Tip: Understanding Graceful restart and non-stop forwarding for OSPF in FortiGate HA
Technical Note : BGP configuration example to prevent a FortiGate from redistributing BGP routes lea...
Technical Note : BGP configuration example to prevent a FortiGate from redistributing any BGP route...
Technical Note: Configuring BGP on a FortiGate with single-homed eBGP peering, iBGP peering, access-...
Technical Note : Static NAT VIP accessible from 2 external interfaces with E-BGP peerings
Technical Note : How to implement BGP route summary (aggregation) on a FortiGate
Technical Note : FortiGate example to announce routes in BGP and accept only a BGP default route (pr...
Technical Note : BGP dual-home example - solution to avoid RPF problem in asymetric routing scenario
Technical Tip: BGP recursive resolution not possible via another BGP route
Technical Tip: Understanding Graceful restart and non-stop forwarding for BGP in FortiGate HA
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.