np_phy_vtss10g_power: NULL parameter or not present

[Hsts]

Hi everyone,

I have a Fortigate 1000D but it cannot boot. I already tried to format boot and upload firmware options. The console output like this;

Total 262144kB unzipped.
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?d
Programming the boot device now.
................................................................................................................................................................................................................................................................
Reading boot image 2773522 bytes.
Initializing firewall...
System is starting...
Starting system maintenance...
Scanning /dev/sda1... (100%)
Scanning /dev/sda3... (100%)
np_phy_vtss10g_power: NULL parameter or not present
_np_phy_vtss1g_set_attr Failure to get memory for linkupdate_priv
_np_phy_vtss1g_set_attr Failure to get memory for linkupdate_priv
_np_phy_vtss1g_set_attr Failure to get memory for linkupdate_priv
_np_phy_vtss1g_set_attr Failure to get memory for linkupdate_priv
_np_phy_vtss1g_set_attr Failure to get memory for linkupdate_priv
...

... "it's repeating again and again"

...

[<ffffffffa012a0de>] ? np6_per_mii_write_with_page+0x199/0x47a [filter4]
[<ffffffffa01aa24b>] ? np_switch_vtss3308_clean+0x1548/0x2106 [filter4]
[<ffffffffa01aa2f8>] ? np_switch_vtss3308_clean+0x15f5/0x2106 [filter4]
[<ffffffffa01aa8f4>] ? np_switch_vtss3308_clean+0x1bf1/0x2106 [filter4]
[<ffffffffa01ab324>] ? np_phy_vtss10g_probe+0x51b/0x543 [filter4]
[<ffffffffa01218ad>] ? np6_lif_select_queue+0x48c/0x4d3 [filter4]
[<ffffffff804ae8cd>] ? dev_ethtool+0x202/0x1ad5
[<ffffffff80526e40>] ? br_ip6_route_input+0x13/0x13
[<ffffffff804ad208>] ? dev_ioctl+0x275/0x81d
[<ffffffff8024e3c7>] ? check_preempt_curr+0x26/0x8b
[<ffffffff8024fa3c>] ? select_task_rq_fair+0x34f/0x870
[<ffffffff8024e3c7>] ? check_preempt_curr+0x26/0x8b
[<ffffffff8024e43e>] ? ttwu_do_wakeup+0x12/0x87
[<ffffffff8025597e>] ? try_to_wake_up+0x1b0/0x238
[<ffffffff804ac676>] ? netdev_run_todo+0x4c/0x24d
[<ffffffff804f65ea>] ? devinet_ioctl+0x150/0x72a
[<ffffffff804f7aaf>] ? inet_ioctl+0x189/0x198
[<ffffffff8024f069>] ? __dequeue_entity+0x2d/0x34
[<ffffffff8049a3fc>] ? sock_ioctl+0xe9/0x181
[<ffffffff802c02b2>] ? get_empty_filp+0x71/0x132
[<ffffffff802cddd7>] ? do_vfs_ioctl+0x2b9/0x494
[<ffffffff80498d63>] ? sock_alloc_file+0x90/0xfe
[<ffffffff802cdfed>] ? sys_ioctl+0x3b/0x6e
[<ffffffff80202a9d>] ? math_state_restore+0x33/0x47
[<ffffffff805768fb>] ? system_call_fastpath+0x16/0x1b
Rebooting in 5 seconds..FortiGate-1000D (11:55-02.25.2015)
Ver:04000009

And reboot again... This loop never stops. What must i do? Any ideas?

FortiGate