Troubleshooting Tip: No set/unset on constant table entry 'le-switch'

[SPrabu]

Description	This article describes the Command Warning: NO set/unset on constant table entry "le-switch" message in FortiExtender CLI.
Scope	All FortiExtender Models
Solution	The LAN Extension for the FortiExtender models can be configured using the following document: FortiGate 7.0.0 New Features - LAN Extension Mode. When attempting to modify the 'le-switch' interface in versions 7.4.x, refer to the documentation here: FortiExtender 7.4.4 Admin Guide - FortiGate Managed. Upon trying to edit the 'le-switch' interface, the following error may occur: FX (switch-interface) # show config system switch-interface     edit le-switch         set members le-agg-link lan         set stp disable     next end FX (switch-interface) # edit le-switch Command Warning: NO set/unset on constant table entry "le-switch" The 'le-switch' system switch interface output is a constant instance and cannot be modified via CLI. The 'le-switch' is reserved and created by FortiGate. During LAN extension formation, users must choose an alternative name (e.g. 'le-switch1') when creating a new switch interface under config system switch-interface. Note: Any configured switch-interface settings will be removed after the next sync with FortiGate. This means a reboot or WAN reconnection will cause the settings to disappear.