This article describes how to install on Horizon VDI Master Image.
Scope
FortiEDR.
Solution
->Install Collector with the VDI switch. ->Make sure it is running in the console and green. ->Make sure the services are running fine with an Automatic setting ->If all is good, open the command prompt as Admin.
Run this command:
FortiEDRCollectorService.exe --stop --clean
Note: The —clean remove the agentId from bootstrap.
->Shutdown the machine. ->Take a snapshot of the procedure. ->Push out images.
Note: Start the image again and follow the process again.
->Open command prompt as Admin ->Run this command:
FortiEDRCollectorService.exe --stop --clean
Note: The —clean remove the agentId from bootstrap
->Shutdown the machine. ->Take a snapshot of the procedure. ->Push out images.
