Technical Tip : FortiEDR Installer parameters commands

[kwernecke]

Description	This article describes the command line installer parameters.
Scope
Solution	Installer parameters To set a property, add PROPERTY=value to the command line. Name Description / Use Notes PWD registration password The password used to register with the aggregator. Required to stop and uninstall collector UPWD uninstall password Used during silent uninstall EPWD registration password Encrypted registration password. Used by silent installer generator. AGG aggregator address The aggregator address in format ip:port or hostname:port AGG_BASE aggregator address The aggregator ip (if in quiet mode, use AGG instead) AGG_PORT aggregator port The aggregator port (optional, default is 8081)  (if in quiet mode, use AGG instead) GWADDR gateway address The ip of the machine the core is running on. Only for core installer. DEFGROUP default group The default group for collector to be registered to. Optional. ORG organization The organization the collector or core belongs to RMCONFIG remove program data During uninstall, if this property is set will remove the program data directory ALT altitude Set the default altitude value VDI use vdi Enable vdi (VDI=1) or disable (VDI=0) CITRIXPVS Installation on Citrix PVS Enable PVS (CITRIXPVS=1) or disable (CITRIXPVS=0) PROXY use system proxy To enable PROXY=1 to disable PROXY=0 NEEDREBOOT disable until reboot Set "SOFTWARE\\enSilo\\Options\\DisableUntilReboot" to 1 ENABLE_ELAM disable ELAM support On first install, do not install ELAM by default: ENABLE_ELAM="0" CUSTOMCONFIGPATH use custom bootstrap On first install specify bootstrap file for the collector to use