Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiCloud Products
Created on
DescriptionThis article describes how to validate if the 'reset-button disable' functionality is working or not.ScopeFortiSwitch versions 7.2.7, 7.4.3, 7.6.0 and above.Solution
Refer to the following document: Using the ...
Created on
DescriptionThis article describes an issue observed with the FortiSwitch 6XXF series running FortiSwitchOS version 7.4.3.ScopeFortiSwitch 6XXF on FortiSwitchOS v7.4.3.Solution
Behavior:
The issue is primarily encountered...
Created on
Description
This article describes the default interface configuration of the inter-switch link trunk, mclag-icl fortilink trunk and the FortiGate Fortilink trunk that the FortiSwitch forms automatically in a Managed For...
Created on
Edited on
DescriptionThis article describes how to troubleshoot multiple crashes 'ismt_smbus 0000:00:13.0: completion wait timed out' on FortiSwitchScopeFortiSwitch v7.x.Solution
'diag debug crashlog read' output shows the below c...
Created on
Edited on
DescriptionThis article describes the troubleshooting steps to check when IGMP snooping is not working as expected.ScopeFortiSwitch v6.4.x and above.Solution
Before beginning, it is important to go through the below link...
asharma02
New Contributor
Created on
Edited on
Description
This article describes how to configure STP priority on managed switches using custom commands.Related link:FortiSwitch 6.2.FortiSwitch admin guide (stp instance/changing priority): page 107 FortiSwitchOS A...
Can't find what you are looking for?
Suggest New Article