Technical Tip: How to confirm the FortiClient Endpoint has a TAG assigned

[JHelio]

Description	This article describes how to check the FortiClient Endpoint has the TAG assigned from FortiClient EMS.
Scope	Forticlient EMS, FortiClient. FortiClient Endpoint must have a connection to Forticlient EMS by Telemetry.
Solution	Make sure the TAG rule is created and the endpoint accomplishes such a rule. Confirm the TAG rule is enabled: Check at 'Zero trust tag monitor' to detect the endpoint under such TAG. At 'All Endpoints', look for the endpoint and check the TAG is being shown. Also, check at the FortiClient Endpoint the same TAG is assigned as well.