Description
Solution
This article explains how to enable the debug log within FortiClient.
Solution
1. Launch FortiClient.
2. Go to File > Settings.
3. Expand “Logging” section and enable relevant features for which debug is required.
4. Set “Log level” as “Debug”.
5. Select “OK”.
6. To collect the logs, go to File > Settings, and select “Export logs”.
2. Go to File > Settings.
3. Expand “Logging” section and enable relevant features for which debug is required.
4. Set “Log level” as “Debug”.
5. Select “OK”.
6. To collect the logs, go to File > Settings, and select “Export logs”.
Related Articles
Technical Note : How to enable debug log in FortiClient v4.0
