Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiAnalyzer
Created on
Description
This article describes how to troubleshoot FortiAP unable to broadcast an SSID on the 6E band.
Scope
FortiAP 6E.
Solution
Ensure both FortiAP and FortiGate are using the latest GA version of each of...
Created on
Edited on
DescriptionThis article describes how to troubleshoot the SSID not broadcasting Issue on the FortiAP/FortiGate setup.ScopeFortiAP and FortiGate.Solution
FortiAP's Profile: The Country on the FortiAP profile should match ...
Created on
Description
This article describes how to resolve a situation where, when adding an 8th SSID to the RADIUS server, the following error occurs:
Error in the CLI:
Error in the GUI:
 
Scope
FortiGate v7.2 and ab...
Created on
Edited on
Description
This article describes the distinction between SSIDs in Local Bridge and Tunnel modes.
Scope
FortiAP v5.x or earlier.FortiOS v6.x or earlier.
Solution
Client traffic comparison
Bridge Mode (Local ...
Created on
Edited on
DescriptionThis article describes an overview of how 'Block intra-SSID traffic' option on SSID configuration works on the bridge mode SSID as there is slight variation between tunneled and bridged.ScopeFortiOS 7.x.Solut...
Created on
Edited on
DescriptionThis article describes how to map bridge mode SSID to FortiAP profile.SolutionBy default only the tunnel mode SSIDs will be enabled on the FortiAPs. To enable and make the FortiAP broadcast any bridge mode SSI...
Can't find what you are looking for?
Suggest New Article