Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiAnalyzer
iyotov
Staff
Created on
Edited on
Description
This article explains why the UTM logs for ICMP traffic contain source and destination port numbers.
Solution
For ICMP UTM logs, the "dstport" field is used to display the ICMP code, and "srcport" is showing ...
cbenejean
Staff
Created on
DescriptionThe default IPv6 route learned from Router Advertisement cannot be seen in the standard routing table with the usual command:get router info6 routing-table databaseScopeFortiOS v4.3 and later.SolutionThe only ...
jngouo_FTNT
Staff
Created on
DescriptionThis article provides a list of available FortiAnalyzer firmware and gives which version it can be directly upgraded from.SolutionThe following table is for reference only. Review the applicable FortiAnalyzer ...
edgar1
Staff
Created on
DescriptionThe message READ-ONLY displayed on the GUI indicates that hard drives cannot be mounted and that the FortiAnalyzer cannot collect or register logs.ScopeFortiAnalyzer v4.0 MR3, v5.0, v5.2.SolutionThis issue ma...
fgilloteau_FTNT
Staff
Created on
DescriptionThis article explains and gives some SQL request examples that can be used in a report.SolutionTo create a manual SQL request that can be used in a report, a Dataset must be created:* Go to an ADOMReport > ...
bthomaj
Staff
Created on
Edited on
Description
There may be occurences when a SQL dataset query unexpectedly returns "No Data", this may be due to the use of hcache.The hcache is a feature on the FortiAnalyzer that helps to speed up creating reports by u...
Jonathan_Body_FTNT
Staff
Created on
Edited on
Description
This article explains of the "SSH Fatal Error:fatal: Read from socket failed: Connection reset by peer." log error message seen on the FortiAnalyzer.
Scope
Solution
"SSH Fatal Error:fatal: Read from socke...
Jonathan_Body_FTNT
Staff
Created on
Edited on
Description
This article explains how to enable remote logging to a FortiAnalyzer unit from a FortiManager unit.
Scope
FortiAnalyzer software versions 4.0 MR2, 4.0 MR3 and 5.0.x.
FortiManager software versions 4.0 MR2, 4...
Can't find what you are looking for?
Suggest New Article