Description
This article describes what to do if FortiAnalyzer is in Maintenance mode.
Scope
FortiAnalyzer and FortiManager.
Solution
Maintenance Mode signifies that the system connects the hard drives or the hard drives cannot be mounted properly. If the hard drives have no physical issues this can be fixed by repairing the file system:
diagnose system fsck harddisk
This operation will check and repair the file system, then reboot the system.
Do you want to continue? (y/n)y
Note:
This command will reboot the system.
If the file system repair does not fix the issue, formatting the log disk may be required:
execute format disk-ext4 <----- Format log disk into ext4 file system.
This operation will format hard disk with ext4 file system.
Do you want to continue? (y/n)y
This method will cause all logs to be lost as the hard drive(s) will be formatted.
