Troubleshooting Tip: How to troubleshoot when File System status shows 'Unknown'

[sseriramalu]

Description	This article describes how to troubleshoot when the File System status shows 'Unknown'.
Scope	FortiAnalyzer, FortiManager.
Solution	The picture below shows the File System status 'Unknown' when executing the CLI command: get system status This issue usually occurs when only a single virtual hard disk is configured in the FortiAnalyzer/FortiManager VM. At least one extra virtual hard disk must be added (ideally over 500 GB) before starting the FortiAnalyzer/FortiManager VM. Refer to the link below for the steps to know how to add new virtual disks and extend the logical volume: Technical Tip: Extending disk space in FortiAnalyzer-VM/FortiManager-VM Once the step above is completed, run the command below again to confirm the File System Status: get system status Related documents: Configuring hardware settings - FortiAnalyzer Private Cloud 7.6.0 Configuring hardware settings - FortiManager Private Cloud 7.6.0