FortiAnalyzer
FortiAnalyzer can receive logs and Windows host events directly from endpoints connected to EMS, and you can use FortiAnalyzer to analyze the logs and run reports.
axel_gonzalez_FTNT

Description

 

This article describes that there are two ways to modify ports of the FortiSwitch using FortiManager.

 

Scope

 

FortiSwitch, FortiManager.

 

Solution

 

Option 1.

Using device layer configuration. It is necessary to go to CLI Configurations and then select the switch.

Once changed, it is possible to proceed to see install preview on Install Device Settings (only).

 

axel_gonzalez_FTNT_0-1648772321545.png

 

Option 2.

FortiSwitch Module. If  Fortiswitch Template is used, modify the configuration using the template already obtained. Once these changes done,it is possible to proceed to see install preview on Install Device Settings (only).

 

axel_gonzalez_FTNT_1-1648772361628.png

 

axel_gonzalez_FTNT_2-1648772376754.png