Technical Tip: How to access a secondary HA unit using CLI

[Nur]

Description	This article describes how to access a secondary HA unit using CLI.
Scope	FortiAnalyzer, FortiManager
Solution	Before using the CLI command, ensure the FortiAnalyzer HA status is UP. And then, use these CLI commands: Viva-kvm32 # exe ssh <Secondary IP> <Username>  Viva-kvm32 # exe ssh 10.47.3.199 admin  The authenticity of host '10.47.3.199 (10.47.3.199)' can't be established. ED25519 key fingerprint is SHA256:LEUYE1MPGJXbAlj/YEFfjV9obN+kK0EOb2F4GIDsaU4. This key is not known by any other names. Are you sure you want to continue connecting (yes/no/[fingerprint])? yes (admin@10.47.3.199) Password: Tiara-kvm21 # Related document:  Setting up a FortiAnalyzer HA cluster