FortiAnalyzer
FortiAnalyzer can receive logs and Windows host events directly from endpoints connected to EMS, and you can use FortiAnalyzer to analyze the logs and run reports.
RuiChang
Staff
Staff
Article Id 242380
Description

 

This article describes the procedure to enable configuration options that are not visible by default.

 

Scope

 

FortiManager/FortiAnalyzer.

 

Solution

 

By default, common configuration options are available in the device manager or policy packages. Most of the options are not visible in the GUI and must enable manually in the GUI. 

 

Note:

In FortiManager v7.2.2 and above, the Display Options will be known as Feature Visibility.

 

1) Device Manager.

Go to Device Manager -> [Device Name] -> Display Options and select the options to be used.

 

RuiChang_0-1673257472252.png

 

2) Policy Packages.

a) Go to Policy Packages -> Tools -> Display options

 

RuiChang_0-1673257559499.png

 

b) In FortiManager v7.2.2 onwards, Policy Packages -> Tools -> Feature Visibility

 

RuiChang_0-1677034515472.png

 

After Display Options/Feature Visibility is selected, proceed to choose the options in the table shown below:

 

RuiChang_1-1673257574741.png

 

Related document:

https://docs.fortinet.com/document/fortimanager/7.2.0/administration-guide/778000/choosing-display-o...