FortiAP devices are thin wireless access points (AP) supporting the latest Wi-Fi technologies (multi-user MIMO 802.11ac Wave 1 and Wave 2, 4x4), as well as 802.11n, 802.11AX , and the demand for plug and play deployment.
Description This article explains how to manage FortiAPs as standalone mode (HTTP, HTTPS, SSH, Telnet) after upgrading to firmware 5.4.x or above.
Solution After adopting FortiAPs on FortiGate controller, the standalone administration on FAPs is disabled by default.
To enable the standalone administration, execute the following CLI commands on FortiGate:
# config wireless-controller wtp-profile edit FAP-Profile-default <------(Edit the profile to which the AP is assigned) set allowaccess http https ssh telnet end
