Problem Converting mib to xml

[cmaldonado]

I try to convert the mib of dell idrac but cannot succeed. It only allows me to export information from the ISO.

For Example:

<iso id="" oid=".1"><org id="3" oid=".1.3"><dod id="6" oid=".1.3.6"><internet id="1" oid=".1.3.6.1"><mgmt id="2" oid=".1.3.6.1.2"></mgmt><private id="4" oid=".1.3.6.1.4"><enterprises id="1" oid=".1.3.6.1.4.1"></enterprises></private></internet></dod></org></iso>

I attach the mib file used. (mib2xml)

[KevinCanalichio]

I have had this issue in the past try running dos2unix on the mib file before running in mib2xml.

Sent from my iPad

[dtomic_FTNT]

Hi Carlos,

You typically need the MIBs in the IMPORT section in the same folder:

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF

Kind Regards,

------------------------------
Dušan Tomić - Consulting Systems Engineer INTL
Fortinet
------------------------------