MC1500/1550 Image

chamBaso · ‎09-24-2020

Dear Sir,

Do you have images for MC1500 and 1550 and one of your posts had version 6.
I am looking for code versions 7.8.0 and 8.5 Build6 for both type of controllers. If you have those, much appreciated.

Thank You
Yours faithfully,
CHAMI

jbattam_FTNT · ‎09-25-2020

Hi Chami,

Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.

Please see attached images below for the MC1550. I hope this helps you.

meru-7.0-8-0-MC1550.img.zip
Password: Sd833tdt
https://fortinet.egnyte.com/dl/nCuUYAtw1G

meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44

Kind Regards,

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------

John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327

View solution in original post

GiaCap · ‎12-11-2024

hello,
I have a problem with a meru 1550 and need to re-download images:

meru-7.0-8-0-MC1550.img.zip
meru-8.5-0build-2-MC1550-rpm.tar

Could you please upload them again?

Thank You

mipxman · ‎02-05-2025

I have a MERU WLC ,MC1550 that runs in version 8.3-3GAbuild-0 , when I copy the new version (meru-8.4-8build-1-MC1550-rpm.tar.fwlc) with ftp or tftp the process is failed with below error, is there any trick need ?

/opt/meru/var/upgrade

TFTP ok

/opt/wlan/bin/gen_img: /lib/libcrypto.so.1.0.0: no version information available (required by /opt/wlan/bin/gen_img)

Converting [meru-8.4-8build-1-MC1550-rpm.tar.fwlc] from proprietary image format.

Reading proprietary format failed , exiting

MC1500/1550 Image

Nominate a Forum Post for Knowledge Article Creation

You are leaving our website