MC1500/1550 Image

[chamBaso]

Dear Sir,

            Do you have images for MC1500 and 1550 and one of your posts had version 6.
 I am looking for code versions 7.8.0 and 8.5 Build6 for both type of controllers. If you have those, much appreciated. 

Thank You
Yours faithfully,
CHAMI

[jbattam_FTNT]

Hi Chamila,

Please see updated link below.

meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: X5zox7om
https://fortinet.egnyte.com/dl/3UZdR1dNIZ

Cheers,
JB

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------

[chamBaso]

Dear Sir, 

          Thanks a lot

Yours faithfully,
CHAMI

Original Message:
Sent: Sep 25, 2021 06:22 PM
From: John Battam
Subject: MC1500/1550 Image

Hi Chamila,

Please see updated link below.

meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: X5zox7om
https://fortinet.egnyte.com/dl/3UZdR1dNIZ

Cheers,
JB

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------

Original Message:
Sent: Sep 24, 2021 09:44 AM
From: Swathi Nanduru
Subject: MC1500/1550 Image

@John, please help respond to @jung's question regarding MC3200 Image here.​

------------------------------
fuse@dmin

Original Message:
Sent: Sep 24, 2021 05:24 AM
From: jung keyng joo
Subject: MC1500/1550 Image

HI john

MC3200용 이미지가 있습니까?

제발.
Original Message:
Sent: Sep 25, 2020 04:22 PM
From: John Battam
Subject: MC1500/1550 Image

Hi Chami,

Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.

Please see attached images below for the MC1550. I hope this helps you.

meru-7.0-8-0-MC1550.img.zip
Password: c2Yfr33p
https://fortinet.egnyte.com/dl/Vk5QPly4nr

meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44

Kind Regards,


------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327

Original Message:
Sent: Sep 24, 2020 10:13 PM
From: chami Baso
Subject: MC1500/1550 Image

Dear Sir,

            Do you have images for MC1500 and 1550 and one of your posts had version 6.
 I am looking for code versions 7.8.0 and 8.5 Build6 for both type of controllers. If you have those, much appreciated. 

Thank You
Yours faithfully,
CHAMI

[YusuKata]

Hi John,

My MC1550 stuck in a reboot loop, so I try to Linux recovery.

Now Link was expired, can you please repost that 

meru-7.0-8-0-MC1550.img.zip
Password: c2Yfr33p
https://fortinet.egnyte.com/dl/Vk5QPly4nr

Thank you

[yiming]

Hi John,

Thanks for replying to the email.

I'm sorry I didn't download these files in time, the link to meru-8.5-0build-2-MC1550-rpm.tar is expired, can you renew it  Thanks again!

[yiming]

Hi John

Thanks for replying to the email.

I'm sorry I didn't download these files in time, the link to meru-8.5-0build-2-MC1550-rpm.tar is expired, can you renew it? Thanks again!

[ITtech23]

Hi

I'm wondering if anyone can help me. I'm wanting to upgrade our old MC1550 controller to the latest firmware available. It's currently on version 8.3-0GAbuild-93. I think the upgrade path is to 8.4 then 8.5? Does anyone have the links for these firmwares please?

Thanks