MC1500/1550 Image

[chamBaso]

Dear Sir,

            Do you have images for MC1500 and 1550 and one of your posts had version 6.
 I am looking for code versions 7.8.0 and 8.5 Build6 for both type of controllers. If you have those, much appreciated. 

Thank You
Yours faithfully,
CHAMI

[jbattam_FTNT · Accepted solution]

Hi Chami,

Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.

Please see attached images below for the MC1550. I hope this helps you.

meru-7.0-8-0-MC1550.img.zip
Password: Sd833tdt
https://fortinet.egnyte.com/dl/nCuUYAtw1G

meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44

Kind Regards,


------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------

[chamBaso]

Dear Sir, 

            Thank you so much, this helps.

Best Regards,
CHAMI

[ChriMath1]

I'm sorry to hijack an old thread, but I am also looking for 8.5 image for my MC1550.  Would it be possible to get an updated link?

Thank you so much in advance,
Christian

[jbattam_FTNT]

Hi Christian,

This should be available via the support portal. All you need to do is registered the controller under your user account.
As the MC1550 controller has a Meru serial number you would need to email customer support cs@fortinet.com in order for them to register this unit under your Fortinet support account. Here's a link to download SD 8.5-3 for the MC1550 in the meantime.

meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: X5zox7om
https://fortinet.egnyte.com/dl/3UZdR1dNIZ

Cheers,
John Battam

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------

[chamBaso]

Dear Sir, 

          Link was expired, can you please repost that 
meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: FV8s3BBv
https://fortinet.egnyte.com/dl/LwoLyhdXtl

Thank you
Yours faithfully,
Chamila

[jungkeyn]

HI john

MC3200용 이미지가 있습니까?

제발.

[snanduru_FTNT]

@John, please help respond to @jung's question regarding MC3200 Image here.​

------------------------------
fuse@dmin
------------------------------

[jbattam_FTNT]

Here's an image for the MC3200 System Director 8.5.4GA 

meru-8.5-4build-4-MC3200.img.zip
Password: DGseC62Q
https://fortinet.egnyte.com/dl/BOmVgZ41Kz

Please extract this file before writing the image to the flash card. Please note this is not an upgrade file it's an image file.

Kind Regards,
JB

------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------

[yiming]

Hi John!

my MC1550's SD is 8.3,I downloaded this firmware "meru-8.5-3build-5-MC1550-rpm.tar.fwlc"，but can't upgrade.

the 8.3 SD can't use ths *.fwlc file to upgrade firmware.

please send me the file "meru-8.5-0build-2-MC1550-rpm.tar" to yimi@live.com,tks!

The CF card of my other MC1550 is broken, is there any way to directly write SD firmware to the new CF card?

Thanks a lot!