Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
MC1500/1550 Image
Dear Sir,
Do you have images for MC1500 and 1550 and one of your posts had version 6.
I am looking for code versions 7.8.0 and 8.5 Build6 for both type of controllers. If you have those, much appreciated.
Thank You
Yours faithfully,
CHAMI
Do you have images for MC1500 and 1550 and one of your posts had version 6.
I am looking for code versions 7.8.0 and 8.5 Build6 for both type of controllers. If you have those, much appreciated.
Thank You
Yours faithfully,
CHAMI
Solved! Go to Solution.
Labels:
- Labels:
-
Wireless
1 Solution
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Chami,
Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.
Please see attached images below for the MC1550. I hope this helps you.
meru-7.0-8-0-MC1550.img.zip
Password: Sd833tdt
https://fortinet.egnyte.com/dl/nCuUYAtw1G
meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44
Kind Regards,
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.
Please see attached images below for the MC1550. I hope this helps you.
meru-7.0-8-0-MC1550.img.zip
Password: Sd833tdt
https://fortinet.egnyte.com/dl/nCuUYAtw1G
meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44
Kind Regards,
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
18 REPLIES 18
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Chami,
Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.
Please see attached images below for the MC1550. I hope this helps you.
meru-7.0-8-0-MC1550.img.zip
Password: Sd833tdt
https://fortinet.egnyte.com/dl/nCuUYAtw1G
meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44
Kind Regards,
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
Please see below. The MC1500 doesn't support SD 7.x or SD 8.x as this is hardware platform is very old. SD 6.x is the best we can do for this platform.
The MC1550 however does.
Please see attached images below for the MC1550. I hope this helps you.
meru-7.0-8-0-MC1550.img.zip
Password: Sd833tdt
https://fortinet.egnyte.com/dl/nCuUYAtw1G
meru-8.5-0build-2-MC1550-rpm.tar
Password: 9ZfxMNw8
https://fortinet.egnyte.com/dl/mo4w3GeW44
Kind Regards,
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Sir,
Thank you so much, this helps.
Best Regards,
CHAMI
Thank you so much, this helps.
Best Regards,
CHAMI
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm sorry to hijack an old thread, but I am also looking for 8.5 image for my MC1550. Would it be possible to get an updated link?
Thank you so much in advance,
Christian
Thank you so much in advance,
Christian
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Christian,
This should be available via the support portal. All you need to do is registered the controller under your user account.
As the MC1550 controller has a Meru serial number you would need to email customer support cs@fortinet.com in order for them to register this unit under your Fortinet support account. Here's a link to download SD 8.5-3 for the MC1550 in the meantime.
meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: X5zox7om
https://fortinet.egnyte.com/dl/3UZdR1dNIZ
Cheers,
John Battam
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
This should be available via the support portal. All you need to do is registered the controller under your user account.
As the MC1550 controller has a Meru serial number you would need to email customer support cs@fortinet.com in order for them to register this unit under your Fortinet support account. Here's a link to download SD 8.5-3 for the MC1550 in the meantime.
meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: X5zox7om
https://fortinet.egnyte.com/dl/3UZdR1dNIZ
Cheers,
John Battam
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Sir,
Link was expired, can you please repost that
meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: FV8s3BBv
https://fortinet.egnyte.com/dl/LwoLyhdXtl
Thank you
Yours faithfully,
Chamila
Link was expired, can you please repost that
meru-8.5-3build-5-MC1550-rpm.tar.fwlc
Password: FV8s3BBv
https://fortinet.egnyte.com/dl/LwoLyhdXtl
Thank you
Yours faithfully,
Chamila
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI john
MC3200용 이미지가 있습니까?
제발.
MC3200용 이미지가 있습니까?
제발.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Here's an image for the MC3200 System Director 8.5.4GA
meru-8.5-4build-4-MC3200.img.zip
Password: DGseC62Q
https://fortinet.egnyte.com/dl/BOmVgZ41Kz
Please extract this file before writing the image to the flash card. Please note this is not an upgrade file it's an image file.
Kind Regards,
JB
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
meru-8.5-4build-4-MC3200.img.zip
Password: DGseC62Q
https://fortinet.egnyte.com/dl/BOmVgZ41Kz
Please extract this file before writing the image to the flash card. Please note this is not an upgrade file it's an image file.
Kind Regards,
JB
------------------------------
John Battam
CSE - Wireless APAC
Fortinet
Sydney | Australia
CWNE #327
------------------------------
John Battam
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Principal CSE - Wireless/IAM International Region
Fortinet
Sydney | Australia
CWNE #327
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi John!
my MC1550's SD is 8.3,I downloaded this firmware "meru-8.5-3build-5-MC1550-rpm.tar.fwlc",but can't upgrade.
the 8.3 SD can't use ths *.fwlc file to upgrade firmware.
please send me the file "meru-8.5-0build-2-MC1550-rpm.tar" to yimi@live.com,tks!
The CF card of my other MC1550 is broken, is there any way to directly write SD firmware to the new CF card?
Thanks a lot!
my MC1550's SD is 8.3,I downloaded this firmware "meru-8.5-3build-5-MC1550-rpm.tar.fwlc",but can't upgrade.
the 8.3 SD can't use ths *.fwlc file to upgrade firmware.
please send me the file "meru-8.5-0build-2-MC1550-rpm.tar" to yimi@live.com,tks!
The CF card of my other MC1550 is broken, is there any way to directly write SD firmware to the new CF card?
Thanks a lot!