Hello All,
I have configured a IPsec Tunnel on my fortigate 60D and can use my credentials to get into the device from my laptop with the FortiClient Software. Once in I do receive the correct Ip address from the pool I specified for the remote users but I am unable to ping the internal Interface of the 60D.
Troubleshooting steps I have taken so far:
opened command prompt on lap top and preformed ipconfig /all to see if the nic is getting a IP address in its range and to look at the default gateway. the pool of ip are 192.168.51.100 - 254 - I recive 192.168.51.100 Default gateway I receive is 192.168.51.101.
try ping the default gateway 192.168.51.101 - unable to ping it
try to ping the internal network ip 192.168.50.1 - unable to ping it
Thanks for reading over this and any help given.
