This forum is for all security enthusiasts to discuss Fortinet's latest & evolving technologies and to connect & network with peers in the cybersecurity hemisphere. Share and learn on a broad range of topics like best practices, use cases, integrations and more. For support specific questions/resources, please visit the Support Forum or the Knowledge Base.
We are getting very high retry counts on various Access Points - some reaching as much as 80% - on the 2.4GHz channel. I've changed channels from 1, to 6 and 11 and still these high utilisation levels are there. How can I investigate and cure?
Thanks
Solved! Go to Solution.
Check the AP Neighbour count. If it is high (more than ~10-15) then you may have AP's too close together and/or have the EIRP (transmit power too high)
Check the AP Neighbour count. If it is high (more than ~10-15) then you may have AP's too close together and/or have the EIRP (transmit power too high)
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.