This forum is for all security enthusiasts to discuss Fortinet's latest & evolving technologies and to connect & network with peers in the cybersecurity hemisphere. Share and learn on a broad range of topics like best practices, use cases, integrations and more. For support specific questions/resources, please visit the Support Forum or the Knowledge Base.
We are getting very high retry counts on various Access Points - some reaching as much as 80% - on the 2.4GHz channel. I've changed channels from 1, to 6 and 11 and still these high utilisation levels are there. How can I investigate and cure?
Check the AP Neighbour count. If it is high (more than ~10-15) then you may have AP's too close together and/or have the EIRP (transmit power too high)
Check the AP Neighbour count. If it is high (more than ~10-15) then you may have AP's too close together and/or have the EIRP (transmit power too high)
Mark Ribbans
Announcements
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
