FortiSwitch forum?

[#1]

There is no FortiSwitch forum? I just installed our first FortiSwitch with a client and the documentation for getting it working did NOT work with the latest versions of firmware.

Norris Carden, CISSP, CISA | Sr. Security Engineer | Arnett Group™

920.261.2037  x115

[rmock_FTNT]

Hello Norris, 

The FortiSwitch forum would be located at https://fusecommunity.fortinet.com/p/fo/si/topic=728.

[#3]

I swear I did a search on the page and didn't find the word switch. Thanks!

Norris Carden, CISSP, CISA | Sr. Security Engineer | Arnett Group™

920.261.2037  x115

[Elias_Ortiz]

Tried to access the forum on that link, but said "You have requested information you are not authorized to view." 

Any help?

Elias Ortiz
Iscor Soluciones

[PeteHarr1]

me too, the link doesnt work!

[#6]

Yup, Switch forum no longer works or exists.

Norris Carden

Fortinet XTreme Team USA (2015)
CISSP (2005), CISA (2007), NSE4 (2016)
Sr. Security Engineer | Arnett Group™

[fdelatorre]

Norris and Team,

The FSW forum is alive and well and located at the following URL,

https://forum.fortinet.com/tt.aspx?forumid=84

I just found this out today, courtesy of our Fed SE Team's SEM, Felipe Fernandez.  All the credit goes to him because I was trying to find it, as well.

Cheers, chaps.

Felix A. De La Torre, Jr.

Systems Engineering

Fortinet Federal

See me on LinkedIn

[ERNESTO_GARÍ]

regards.-

How do I get access to that link ?, I'm implementing two 600D and two Fortiswitch 424D and I do not get enough documentation more than the manual, I want to configure this:

#interface GigabitEthernet0 / 1
#switchport trunk allowed vlan 10,16,20,40,50
#switchport mode trunk
#switchport nonegotiate

In the Fortiswitch administered through the FGT, if there is any additional documentation, you would be grateful.

[AmrEnan]

check this,

http://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-managing-fortiswitch-330-54/Stacking.htm

[ramesh_FTNT]

Norris,

can you post to the FortiSwitch forum with more details on the models and firmware rev. Also what specific problem did you encounter ?

Ramesh