Cybersecurity Forum

This forum is for all security enthusiasts to discuss Fortinet's latest & evolving technologies and to connect & network with peers in the cybersecurity hemisphere. Share and learn on a broad range of topics like best practices, use cases, integrations and more. For support specific questions/resources, please visit the Support Forum or the Knowledge Base.

Not applicable

FortiSwitch forum?

There is no FortiSwitch forum? I just installed our first FortiSwitch with a client and the documentation for getting it working did NOT work with the latest versions of firmware.

Norris Carden, CISSP, CISA | Sr. Security Engineer | Arnett Group
920.261.2037  x115
10 REPLIES 10
rmock_FTNT
Staff
Staff

Hello Norris, 

The FortiSwitch forum would be located at https://fusecommunity.fortinet.com/p/fo/si/topic=728.

Not applicable

I swear I did a search on the page and didn't find the word switch. Thanks!

Norris Carden, CISSP, CISA | Sr. Security Engineer | Arnett Group
920.261.2037  x115
Elias_Ortiz

Tried to access the forum on that link, but said "You have requested information you are not authorized to view." 

Any help?

Elias Ortiz
Iscor Soluciones

Elias Ortiz - NSE4
Iscor Soluciones S.A. de C.V.
Elias Ortiz - NSE4Iscor Soluciones S.A. de C.V.
PeteHarr1

me too, the link doesnt work!

Not applicable

Yup, Switch forum no longer works or exists.

Norris Carden

Fortinet XTreme Team USA (2015)
CISSP (2005), CISA (2007), NSE4 (2016)
Sr. Security Engineer | Arnett Group™

fdelatorre

Norris and Team,

The FSW forum is alive and well and located at the following URL,

https://forum.fortinet.com/tt.aspx?forumid=84

I just found this out today, courtesy of our Fed SE Team's SEM, Felipe Fernandez.  All the credit goes to him because I was trying to find it, as well.

Cheers, chaps.

 

Felix A. De La Torre, Jr.

Systems Engineering

Fortinet Federal

See me on LinkedIn

ERNESTO_GARÍ

regards.-

How do I get access to that link ?, I'm implementing two 600D and two Fortiswitch 424D and I do not get enough documentation more than the manual, I want to configure this:

#interface GigabitEthernet0 / 1
#switchport trunk allowed vlan 10,16,20,40,50
#switchport mode trunk
#switchport nonegotiate

In the Fortiswitch administered through the FGT, if there is any additional documentation, you would be grateful.

AmrEnan

check this,

http://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-managing-fortiswitch-330-54/Stacking.htm

ramesh_FTNT
Staff
Staff

Norris,

can you post to the FortiSwitch forum with more details on the models and firmware rev. Also what specific problem did you encounter ?

Ramesh