Skip to main content
Kess
Kess
New Member
March 14, 2016
Question

Wifi not working

  • March 14, 2016
  • 2 replies
  • 6707 views

Hello guys,

I have a really strange problem with a FG 60D 5.2.4 and a Cisco WAP131 WiFi Access Point. The WiFi Access Point is connected on the internal network interface, where cabled clients are also connected.

 

The WiFi clients gets an internal IP Address from one of the servers in the internal network. The internal traffic from/to WiFi clients works perfectly.

Unfortunately the traffic generated from these WiFi clients doesn't pass through the Fortigate in order to reach internet. I can not even see anything in the logs.

 

Do you know if there's some particular setting I should open in order to permit the WiFi clients to reach internet ?

 

Thank you for your replies.

Bye Kess.

    2 replies

    Kess
    KessAuthor
    New Member
    March 15, 2016

    Managed to fix it by myself by connecting the WiFi to another firewall NIC and assigning this NIC as a WiFi Management interface.

     

    Thx anyway for reading...

    Itguy
    Itguy
    New Member
    March 17, 2016

    Sounds like a missing policy.

     

    I recommend segregating policies; Intranet, Internet. Next you need to create a policy FROM-WIFI SSID and TO-Internet (WAN) Without a policy in place your AP's will not talk to the internet.

    Terms & ConditionsAccessibility statement
    Virtual event | September 2026. SASE summit. The age of autonomous trust. Register here!