Skip to main content
fortijack
fortijack
New Member
July 6, 2014
Question

what the cli or gui for operating temperature ?

  • July 6, 2014
  • 2 replies
  • 22684 views
Hi All, i try to lookup the cmd or gui for operating temperature from 4.0&5.0 handbook,kb,and forms, but it seems no answers. Our company will stop offering electricity for 4 hours, but fortigate 200b still work by redundant electricity。 so i need to know it prevent the tmperauter is too high to crash. thanks !

    2 replies

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    July 7, 2014
    There is no (documented or half-documented) CLI command to read out the temperature. But it should be possible via SNMP. Get the MIBs from the support site and search for " temp" . Second thought, if you know your local SE well and he' s a geek you might ask if there is a Fortinet-internal-use-only command for this. You might even ask Support but I' d hang my hopes low...
    emnoc
    emnoc
    New Member
    July 7, 2014
    FWIW: I question the MIB for temp is available in all fortigate appliances. I ' ve walked various fortigate and came up empty handed. This was pet project for me trying to build a cacti data-template for Temp. OP, if you find anything for fortigates and the 200B, please do share what you find.
    Anand_Narayana
    Anand_Narayana
    Explorer
    August 17, 2017

    Please check this if it helps.

     

    http://kb.fortinet.com/kb...=FD36793&sliceId=1

    Terms & ConditionsAccessibility statement