Skip to main content
piligrimm
piligrimm
New Member
January 11, 2023
Question

What difference between SD-WAN zone and SD-WAN rules?

  • January 11, 2023
  • 1 reply
  • 1269 views

Hello,

we updated our fortigate to version 6.11 (previously we had version 6.2)

and now there is a new entity sd-wan zone

we have four providers

what's the difference if:

1. create a SD-WAN zone

2. I will set two Internet providers in this zone

3. And assign this zone to a rule in the firewall

 

AND

1. create a SD-WAN zone

2. I will set all Internet providers in this zone

3. And assign this zone to a rule in the firewall

4. I will create an SD-WAN RULES rule in which I will set a rule for only two providers (from the previous paragraph)

 

1 reply

metz_FTNT
Staff
metz_FTNT
Staff
January 13, 2023

Hello,

 

Think of the Zones like different interfaces, you can set up sd-wan zone with members port1 and port2 and set the zone as destination intf in a policy.

Then you can create a specific rules for how to balance the traffic between the interface members in that zone.   

 

So in your case, you create a zone with two providers, then you need a rule to specify how do you want to utilize the two providers.

 

Check documentation bellow:

 

https://docs.fortinet.com/document/fortigate/6.2.12/cookbook/19246/sd-wan

Terms & ConditionsAccessibility statement