Website after log-in does not load
Hi guys.
So we have a website where after the log-in, elements of the website are not displayed, we see
just a white blank site. One or two times it loaded the website for 1-2seconds but it switched again just blank.
We have a FG200F with firmware v6.4.9. All filters are deactivated and after we even
put a firewall rule for the website to allow any traffic, so no webfilter, no ssl-inspection or no anything like that.
Still the website does not load after log-in. Checked also in CLI, everything there is also disabled.
We tried Firefox, Chrome, Edge (cache war cleared), still nothing.
Wenn wie connect to a FritzBox (Internet Router) to which is the FG connected we can log-in to the website and it loads completly without a problem. So, the problem lies in the Firewall.
We have another FG200F on a another location where all the filters are enabled and there we have no problem with the website, it loads completley after log-in.
Any advice is welcomed.
Thank you