Visitor III

Solved

Webinterface Access via IP Sec VPN

Forum|Forum|4 years ago
May 20, 2022
3 replies
2615 views

Hi all,

i am having 2 Fortigates, FW1 and FW2 connected via IPSec VPN and on both sides i have a client network, in this client network the management web interface is activated, now i want to access from the client network on FW1 the webinterface of the FW2 on the client interface, is this possible?

(The Client Networks are on both sides in the trusted hosts)

best regards

fohe

FortiGate

Best answer by fohe

hi all,

thanks for your input, the problem was the phase 2 selector :( added the net, and it worked.

regards

feho

Staff

Hi,

Yes, it is very much possible. If you had client network on FW1 added to trusted hosts of FW2, the web management access should be possible.

Best regards,

Jin

SuperUser

Don't you also need to have a policy to allow the traffic to flow?

Staff

yes, a policy is essential, and most likely added during the vpn creation to include the client networks participating through the tunnel.

best regards,

Jin

foheAuthorAnswer

Visitor III

hi all,

thanks for your input, the problem was the phase 2 selector :( added the net, and it worked.

regards

feho