Skip to main content
subrata22banerjee
subrata22banerjee
New Member
September 15, 2016
Question

WAN Policy Configuration Help

  • September 15, 2016
  • 1 reply
  • 1954 views

Hi All,

I have Fortigate 70D. And Have 2 ISP configured with same distance and priority.

My goal is to configure the devices as below.

 

1. User A,B,C should allways go through WAN1. 2. User D,E,F should allways go through WAN2. 3. When one of any WAN fails user should automatically go through another WAN.

 

Please help me.

Thanks in advanced.

    1 reply

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    September 15, 2016

    hi,

     

    to start from the end:

    3- this will happen automatically IF you have defined 2 default routes, one for each ISP/WAN port.

    For 1- and 2-:

    as you only have 2 ECMP WAN ports, odd source IP addresses will use one WAN port and even addresses the other. As routing doesn't know the concept of a "user" you could assign local addresses evenly to load share outbound traffic. Or, assign odd addresses to users A, B, C and even addresses to users D, E, F.

    Terms & ConditionsAccessibility statement