VPN Connected, remote routes are not added to the table (log & route table inside) SOLVED
Symptoms
Connection to various SSL-VPN's, except for the remote gateway's address no routes were added to the Routing Table.
Route Print before connection
Route Print after connection
Edit: Appears that Forti's adapter is getting APIPA address after about half a minute into a connected VPN session.
FortiClient Itself shows correct IP, the adapter shows APIPA like the image from above.https://pastebin.com/ZPstmfy6 < SSL adapter from ipconfig /all
Attached or PasteBin is a debug level log of 2 separate remote gateways VPN connection, Connected each for about a minute and disconnected manually. These are 2 different physical FortiGates residing at different locations.
Probable cause: Everything worked well till a power outage occurred, FortiClient was not actively connected during it, I doubt it was even running.
Other thing that might've caused it is an installation of Tor browser (can not be certain if it worked after).
Tried reinstalling Forticlient, removing Tor, System Restore.
This tool is crucial for my work, any help would be appreciated.
Regards, Avi.
P.S - Replaced GW's addr with FortiGate #1 and #2 in log, deleted remote GW's address from Route table pic.