Skip to main content
mminzoni76
mminzoni76
New Member
August 23, 2021
Question

VPN authenticate 2FA - with LDAP an RADIUS

  • August 23, 2021
  • 1 reply
  • 1679 views

Hello

I've configured my fortigate VPN to use LDAP, users are authenticated by default using LDAP/AD.

User enter login and password and authentication is done on AD.

 

Now I want to add 2FA in test so I need to keep the actual config by default and then create a remote group that will use Radius to authenticate. 

But If I try to create a remote group then looks like I've to define also local users that is not very useful for my config because I want to keep users and groups on LDAP and then filter on it and use Radius just for a reduced amount of users.

 

Anyone can help me ?

 

thanks

    1 reply

    sw2090
    SuperUser
    sw2090
    SuperUser
    July 7, 2023

    Hm I have IPSec running on our FGT using radius for 2fa with FortiToken as 2. factor and fortiauthenticator as radiusserver and it works fine using ike v1.

    It does not work using ike v2 because of an EAP issue.

     

    All we needed to do is create a radius connector on the FGT and a radius group on the radius server and addd that to the FGT. I could look into the config to find it.

    There was no need to create local users here.

    Terms & ConditionsAccessibility statement