Skip to main content
BryEarthComm
New Member
June 24, 2021
Solved

VLAN on an SSID

  • June 24, 2021
  • 1 reply
  • 20119 views

I added a VLAN to an SSID and relaized it was in error, as i attempted to remove the VLAN from the SSID its returns and error "Input not as expected". I have removed any policies, addresses and interfaces using the vlan, with the same result.

 

Any help to find other reference points i may not have thought of would be a great help to remove this, thank you.

 

-Bry

Best answer by Toshi_Esumi

That CLI error message generally shows up when you try to remove a system default profile or something similar, which doesn't make sense for a VLAN you created. You might need to open a ticket at TAC if a reboot wouldn't change the outcome.

1 reply

Toshi_Esumi
SuperUser
SuperUser
June 24, 2021

GUI or CLI?

BryEarthComm
New Member
June 24, 2021

either is fine, but I've been using GUI

Toshi_Esumi
SuperUser
SuperUser
June 24, 2021

With my 6.2.7 FGT in GUI, I see "Optional VLAN ID" box only with bridge mode SSID and I could add and remove it without any error. Is it where you have the VLAN?