Skip to main content
se7en102
se7en102
New Member
October 6, 2020
Question

Virtual IPs with Port forwarding cannot crate

  • October 6, 2020
  • 1 reply
  • 3041 views

Dear bros,

My company have firewall fortigate 101E and inside comany we have 3 NVR ( CCTV) , so I want to public them to check camera on my phone by WAN .

So i did :

 - Config virtual ips  for eachs NVR go to 1 WAN , different port

 

NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 

NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044

NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 84, 8044

 

Open 3 policy

 

When i config to use service , rule ok, but not running.

and i did with port forwarding it error  https://www.youtube.com/watch?v=Y9qyBo06meo

 

how can i fix in this case to public my cctv ?

 

 

    1 reply

    fcb
    fcb
    Visitor III
    October 9, 2020

    se7en102 wrote:

    Dear bros,

    NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 

    NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044

    NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 84, 8044

     

     

    NVR 2 and 3 both have the below - Is that a type-o or what?

     

    WAN (115.79.219.100): port 84, 8044

    WAN (115.79.219.100): port 84, 8044  You created these policies with the destination being the VIP/Port forward listed?

    se7en102
    se7en102Author
    New Member
    October 9, 2020

    Dear Bros,

    my mistake about port , it must be :

    NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022  NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044 NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 88, 8088

     

    We have Virtual IPs with filter option services, it not work. no have data transfer.

    I was delete them in policy and in Virtual IPs.

    - Service was defined like : Name =NVR3, ip =1721.6.1.4 , TCP/88 TCP/8088

    - Make new VIPs and only enable Port forwarding TCP 88 and 2nd VIPs for Port 8088

    - New policy with disable NAT option , and now it open.

     

    It works for me now.

    thank you.

     

     

     

    Terms & ConditionsCookie settingsAccessibility statement