Skip to main content
Ali_Jassim
Ali_Jassim
New Member
June 17, 2015
Question

Virtual IP Port forward

  • June 17, 2015
  • 1 reply
  • 3598 views

Virtual IP Port forward

 

Greetings to you

My Device is Foritgate 200D

I have problem I hope you guys give me the solution

 

We have 14 public IP from ISP, I used one of these IP for One Server, to allow our employee to access this server from outside (and its working fine without any problem)

 

My problem is when I use this public IP inside my LAN I can't access this server 

For example server local IP is 192.168.0.11, I can ping this server and I can access it from LAN

And I can access it from outside using Public IP,

But! When I use this public IP and I am in our company inside my LAN, I can't access server

I HOPE FINED A SOLUTION FROM YOU GUYS.

    1 reply

    TuncayBAS
    TuncayBAS
    Explorer
    June 18, 2015
    First virtual ip external interface change to any. Next policy route added Incoming interface lan and lan subnet Outgoing interface lan and lan subnet Gateway set to empty
    Ali_Jassim
    Ali_JassimAuthor
    New Member
    June 18, 2015

    yaba wrote:
    First virtual ip external interface change to any. Next policy route added Incoming interface lan and lan subnet Outgoing interface lan and lan subnet Gateway set to empty

    Dear YABA

    Thank you for your Quick Replay

    i don't understand very will , could you explain  more

     

    1 - i should change the Virtual IP interface External to any --- this is clear

    2 - Policy route ? policy route for what ? for the public IP , or LAN IP ?

    3- Incoming INT - LAN AND LAN Subnet --- you mean i have to create new policy with Incoming int LAN and source address ?? and with destination address

     

    PLEASE COULD YOU JUST support your replay with Picture , it will be batter for me ..

     

    Thanks

     

    Terms & ConditionsAccessibility statement