Skip to main content
cristofer666
cristofer666
New Member
August 30, 2018
Question

Verify secure mail ports for DLP revision

  • August 30, 2018
  • 0 replies
  • 1937 views

Good day everyone, I proceed to perform the following query, I have a Forti 80D with FortiOS System v5.6.2 build1486 (GA), and proceed to make the following query, it is essential to configure the DLP that brings the Forti. When configuring it is only observed that the module only allows me to configure the ports:

WEB ACCESS: HTTP-POST - HTTP-GET EMAIL: SMTP - POP3 - IMAP - MAPI OTHERS: FTP - NNTP

If I have a network working through port 25 (SMTP) I capture the traffic and proceed to perform the set configuration. But if I have configured a secure port like 465 (SMTPS), the traffic that passes through that port is not detected by the fort and it does not do the work that is required.

My query is how I can configure the other ports so that the forti detects me the traffic that goes through those ports. Now try to change or modify the port in the Services area but without any new features.

In careful waiting for your help.

Best regards.

Terms & ConditionsAccessibility statement