Skip to main content

1 reply

oheigl
New Member
September 21, 2017

If you don't need NAT and not directly connect to the VDOM links, you don't have to assign any IP on the VDOM links, this would simplify the configuration for you. If you want to route something over the VDOM link, set the gateway in the route to 0.0.0.0 and it works.

emnoc
New Member
September 21, 2017

I prefer ipv4 address   and you can set the links as  ethernet or p2p. I post this a few years back for examples

 

 

http://socpuppet.blogspot.com/2014/09/a-stacked-vdom-concept-with-fortigate.html

http://socpuppet.blogspot.com/2014/09/a-meshed-vdom-transparent-using-inter.html

 

 

Gautam
GautamAuthor
New Member
September 22, 2017

Thanks emnoc, I will try this and update..