Skip to main content
Fahad
Fahad
New Member
December 28, 2014
Solved

VDOM failover in vcluster

  • December 28, 2014
  • 4 replies
  • 8947 views

hi,

 

we have two 1500D with vdom enabled on both, each should have 4 VDOMs (root,vpn,servers,wan) i configured an HA A/P with vcluser2 enabled and moved Servers vdom to vcluster 2 to become the master in the other unit, so basically it becomes like that: 

 

Device Priority Name             Vcluster1                    Vcluster2 FGT_ha_1      200(root,vpn,wan)       100 (servers) FGT_ha_2      100 (servers)              200(root,vpn,wan)

 

which worked great in term of flow, now when testing the vdom failover (port monitor enabled on vdom port lever) we manually unplugged the vdom cables unfortunately the failover did not happened until i moved the vdom manually to the other vcluster e.g: moved vpn to vcluster2 .

 

did i miss something here ( i followed the document of 5.2 HA ) which i believe should be straight forward. 

 

thanks 

 

Best answer by hklb

Hello

 

You have the same interface monitored in primary and secondary vcluster.. So your monitoring is wrong. Try :

config sys ha

set vdom "CAIT" "VPN" "root" 

set monitor "port21" "port22" "port23" "port24" "port25" (all your interface of vdom  "CAIT" "VPN" "root")

config secondary-vcluster

set vdom "forti_srv"  set monitor  "port26" "port31" "port32" (all your interface of vdom  "forti_srv")

end

end

 

and try again

 

Lucas

 

4 replies

emnoc
emnoc
New Member
December 29, 2014

Can you draw a vdom topology of the layout? And  did you ran any diagnostic when you simulated the failover? (diag debug application  ha sync and talk )

 

 

Fahad
FahadAuthor
New Member
December 29, 2014

hi emnoc,

 

no i did not run the command when we simulate the issue, am attaching a draw i made helps you understand my issue better.

Fahad
FahadAuthor
New Member
December 29, 2014

am sharing this also: 

 

diag debug application hasync 6538: Unknown action 0 Command fail. Return code -1

FG1K5D3I14800133 # FG1K5D3I14800133 # FG1K5D3I14800133 # conf ig ig sy global config global vdom config vdom FG1K5D3I14800133 # config global

FG1K5D3I14800133 (global) # FG1K5D3I14800133 (global) # FG1K5D3I14800133 (global) # FG1K5D3I14800133 (global) # diag debug application hasync hasync debug level is 0 (0x0)

FG1K5D3I14800133 (global) # FG1K5D3I14800133 (global) # FG1K5D3I14800133 (global) # diag debug application hasynctalk hatalk debug level is 0 (0x0)

FG1K5D3I14800133 (global) # config sys ha

FG1K5D3I14800133 (ha) # get group-id : 0 group-name : FGT mode : a-p password : * hbdev : "port17" 50 "port18" 50 session-sync-dev : route-ttl : 10 route-wait : 0 route-hold : 10 sync-config : enable encryption : disable authentication : disable hb-interval : 2 hb-lost-threshold : 6 helo-holddown : 20 gratuitous-arps : enable arps : 5 arps-interval : 8 session-pickup : enable session-pickup-connectionless: disable session-pickup-delay: disable update-all-session-timer: disable session-sync-daemon-number: 1 link-failed-signal : disable uninterruptible-upgrade: enable standalone-mgmt-vdom: disable ha-mgmt-status : enable ha-mgmt-interface : mgmt1 ha-mgmt-interface-gateway: 172.16.108.1 ha-mgmt-interface-gateway6: :: ha-eth-type : 8890 hc-eth-type : 8891 l2ep-eth-type : 8893 ha-uptime-diff-margin: 300 vcluster2 : enable vcluster-id : 1 override : disable priority : 100 monitor : "port21" "port22" "port23" "port24" "port25" "port26" "port31" "port32" pingserver-monitor-interface: pingserver-failover-threshold: 0 pingserver-slave-force-reset: enable pingserver-flip-timeout: 60 vdom : "CAIT" "VPN" "root" secondary-vcluster: vcluster-id : 2 override : enable priority : 200 override-wait-time : 0 monitor : "port21" "port22" "port23" "port24" "port25" "port26" "port31" "port32" pingserver-monitor-interface: pingserver-failover-threshold: 0 pingserver-slave-force-reset: enable vdom : "forti_srv" ha-direct : disable

FG1K5D3I14800133 (ha) #

 

----------------------------------------------------

 

diag debug application hasync hasync debug level is 0 (0x0)

FG1K5D3I14800187 (global) # diag debug application hasync hasync debug level is 0 (0x0)

FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) # diag debug application hasynctalk hatalk debug level is 0 (0x0)

FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) #

FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) # FG1K5D3I14800187 (global) # config system ha

FG1K5D3I14800187 (ha) # get group-id : 0 group-name : FGT mode : a-p password : * hbdev : "port17" 50 "port18" 50 session-sync-dev : route-ttl : 10 route-wait : 0 route-hold : 10 sync-config : enable encryption : disable authentication : disable hb-interval : 2 hb-lost-threshold : 6 helo-holddown : 20 gratuitous-arps : enable arps : 5 arps-interval : 8 session-pickup : enable session-pickup-connectionless: disable session-pickup-delay: disable update-all-session-timer: disable session-sync-daemon-number: 1 link-failed-signal : disable uninterruptible-upgrade: enable standalone-mgmt-vdom: disable ha-mgmt-status : enable ha-mgmt-interface : mgmt1 ha-mgmt-interface-gateway: 172.16.101.1 ha-mgmt-interface-gateway6: :: ha-eth-type : 8890 hc-eth-type : 8891 l2ep-eth-type : 8893 ha-uptime-diff-margin: 300 vcluster2 : enable vcluster-id : 1 override : disable priority : 200 monitor : "port21" "port22" "port23" "port24" "port25" "port26" "port31" "port32" pingserver-monitor-interface: pingserver-failover-threshold: 0 pingserver-slave-force-reset: enable pingserver-flip-timeout: 60 vdom : "CAIT" "VPN" "root" secondary-vcluster: vcluster-id : 2 override : enable priority : 100 override-wait-time : 0 monitor : "port21" "port22" "port23" "port24" "port25" "port26" "port31" "port32" pingserver-monitor-interface: pingserver-failover-threshold: 0 pingserver-slave-force-reset: enable vdom : "forti_srv" ha-direct : disable

FG1K5D3I14800187 (ha) # FG1K5D3I14800187 (ha) #

 

 

 

hklb
hklbAnswer
Visitor III
January 5, 2015

Hello

 

You have the same interface monitored in primary and secondary vcluster.. So your monitoring is wrong. Try :

config sys ha

set vdom "CAIT" "VPN" "root" 

set monitor "port21" "port22" "port23" "port24" "port25" (all your interface of vdom  "CAIT" "VPN" "root")

config secondary-vcluster

set vdom "forti_srv"  set monitor  "port26" "port31" "port32" (all your interface of vdom  "forti_srv")

end

end

 

and try again

 

Lucas

 

Terms & ConditionsAccessibility statement